PRODUCTS / TRANSMISSION SERVICE TOOLS / Clutch Tools / Clutch Tools(97)

 
Model 14-K330
Item Name Honda Oil Filter And Clutch Hub Spanner
Descriptions 3/8"driver and 24mm inside diameter.<br> Material : heat-treated steel.<br>
 
Model 14-K338
Item Name Clutch Hub And Alternator Puller<For Motorcycles>
Descriptions Ideal tool to remove the indicated clutch plates.
 
Model 14-K422
Item Name Clutch Hub And Drum Tool
Descriptions Fits all modern 6 speed Ducati's equipped with a dry clutch.<br> Material: Polyamides (PA) with fiber.<br>
 
Model 14-K422A
Item Name Clutch Hub And Drum Tool<Steel>
Descriptions Fits all modern 6 speed Ducati's equipped with a dry clutch.<br> Material: Carbon Steel.<br>
 
Model 14-K432
Item Name Clutch Locknut Tool 20/24 mm
Descriptions Ideal tool to remove the clutch from the XR50R/CRF50.
 
Model 14-K432A
Item Name Clutch Locknut Tool 25/30 mm
Descriptions Ideal tool to loosen and fasten the locknut for the removal and installation of a clutch. Fits 1/2” drive of socket wrench.
 
Model 14-K432B
Item Name Clutch Locknut Tool 20/24mm
Descriptions Ideal tool to loosen and fasten the locknut for the removal and installation of a clutch. Fits 1/2” drive of socket wrench.
 
Model 14-K432C
Item Name Clutch Locknut Tool 20/24mm
Descriptions Tools comes with a 3/8"square hole inside, that fits a standard ratchet or torque wrench.<br> It is essential tool to remove the clutch from the XR50R/CRF50.<br>
 
Model 14-K435
Item Name Clutch Hub Puller
Descriptions Fits 500/650/750 c.c. Triumphs and also BSA 500/650 twins from '66-on up.<br> Threading is 20tpi. <br> Material: Stainless.<br>
 
Model 14-K436
Item Name Clutch Spring Nut Tool
Descriptions Measures 3"Long
 
Model 14-K438
Item Name Clutch Locking Tool
Descriptions Fit BSA A7, A10 (the late 4 spring clutch), A50 and A65 (4 spring clutch), Triumph 500/650/750 c.c. Twins.<br> A helpful tool for any primary or clutch work you need to do, or if you need to remove your clutch basket while rebuilding your gear box or entire motor.<br>
 
Model 14-K445
Item Name Clutch Spring Tool
Descriptions Fits most old British bike.<br> It works on BSA and Triumph singles/twins and pre-Commando Norton.<br> Material : Stainless<br>
 
Model 14-K463
Item Name Clutch Holder<For BMW>
Descriptions Fits on BMW F series.
 
Model 14-K475
Item Name Clutch Spider Nut Driver
Descriptions It fits P85 and P90 primary clutches on all Polaris ATVs and snowmobiles.<br> It also fits Kawasaki 300 & 400 Prairie 2x4 and 4x4, 99-02 models.<br>
 
Model 14-K475A
Item Name Clutch Spider Nut Driver
Descriptions Fits P85 and P90 primary clutches on all Polaris ATVs and snowmobiles.
 
Model 14-K491
Item Name Clutch Hub Extractor Puller M12 x 1.75
Descriptions 1 3/8"-18 right hand external thread<br> M12 x 1.75 right hand internal thread<br>
 
Model 14-K492
Item Name Clutch Hub Center Puller
Descriptions Fits most of the unit single TR25 Triumph models, BSA 250cc, 441cc, 500cc and from the 1960’s and later Triumph BSA single cylinder models.<br>
 
Model 14-K507
Item Name Clutch Shoe Tool
Descriptions It fits KTM 50 SX series.
 
Model 14-K518
Item Name Clutch Puller M24 x 1.5
Descriptions Fits MZ TS250/1, ETZ 250/251/301, SAXON, KANUNI and all 5 speed models.
 
Model 14-K526
Item Name Clutch Bleeding Tool
Descriptions Ideal tool to truly add or remove fluid from the hydraulic clutch.