PRODUCTS / TRANSMISSION SERVICE TOOLS / Clutch Tools / Clutch Tools（97）
| Model | 14-K330 |
| Item Name | Honda Oil Filter And Clutch Hub Spanner |
| Descriptions | 3/8＂driver and 24mm inside diameter.<br> Material : heat-treated steel.<br> |
Inquire Now
| Model | 14-K338 |
| Item Name | Clutch Hub And Alternator Puller＜For Motorcycles＞ |
| Descriptions | Ideal tool to remove the indicated clutch plates. |
| Model | 14-K422 |
| Item Name | Clutch Hub And Drum Tool |
| Descriptions | Fits all modern 6 speed Ducati's equipped with a dry clutch.<br> Material: Polyamides (PA) with fiber.<br> |
| Model | 14-K422A |
| Item Name | Clutch Hub And Drum Tool＜Steel＞ |
| Descriptions | Fits all modern 6 speed Ducati's equipped with a dry clutch.<br> Material: Carbon Steel.<br> |
| Model | 14-K432 |
| Item Name | Clutch Locknut Tool 20/24 mm |
| Descriptions | Ideal tool to remove the clutch from the XR50R/CRF50. |
| Model | 14-K432A |
| Item Name | Clutch Locknut Tool 25/30 mm |
| Descriptions | Ideal tool to loosen and fasten the locknut for the removal and installation of a clutch. Fits 1/2” drive of socket wrench. |
| Model | 14-K432B |
| Item Name | Clutch Locknut Tool 20/24mm |
| Descriptions | Ideal tool to loosen and fasten the locknut for the removal and installation of a clutch. Fits 1/2” drive of socket wrench. |
| Model | 14-K432C |
| Item Name | Clutch Locknut Tool 20/24mm |
| Descriptions | Tools comes with a 3/8＂square hole inside, that fits a standard ratchet or torque wrench.<br> It is essential tool to remove the clutch from the XR50R/CRF50.<br> |
| Model | 14-K435 |
| Item Name | Clutch Hub Puller |
| Descriptions | Fits 500/650/750 c.c. Triumphs and also BSA 500/650 twins from '66-on up.<br> Threading is 20tpi. <br> Material: Stainless.<br> |
| Model | 14-K436 |
| Item Name | Clutch Spring Nut Tool |
| Descriptions | Measures 3＂Long |
| Model | 14-K438 |
| Item Name | Clutch Locking Tool |
| Descriptions | Fit BSA A7, A10 (the late 4 spring clutch), A50 and A65 (4 spring clutch), Triumph 500/650/750 c.c. Twins.<br> A helpful tool for any primary or clutch work you need to do, or if you need to remove your clutch basket while rebuilding your gear box or entire motor.<br> |
| Model | 14-K445 |
| Item Name | Clutch Spring Tool |
| Descriptions | Fits most old British bike.<br> It works on BSA and Triumph singles/twins and pre-Commando Norton.<br> Material : Stainless<br> |
| Model | 14-K463 |
| Item Name | Clutch Holder＜For BMW＞ |
| Descriptions | Fits on BMW F series. |
| Model | 14-K475 |
| Item Name | Clutch Spider Nut Driver |
| Descriptions | It fits P85 and P90 primary clutches on all Polaris ATVs and snowmobiles.<br> It also fits Kawasaki 300 & 400 Prairie 2x4 and 4x4, 99-02 models.<br> |
| Model | 14-K475A |
| Item Name | Clutch Spider Nut Driver |
| Descriptions | Fits P85 and P90 primary clutches on all Polaris ATVs and snowmobiles. |
| Model | 14-K491 |
| Item Name | Clutch Hub Extractor Puller M12 x 1.75 |
| Descriptions | 1 3/8＂-18 right hand external thread<br> M12 x 1.75 right hand internal thread<br> |
| Model | 14-K492 |
| Item Name | Clutch Hub Center Puller |
| Descriptions | Fits most of the unit single TR25 Triumph models, BSA 250cc, 441cc, 500cc and from the 1960’s and later Triumph BSA single cylinder models.<br> |
| Model | 14-K507 |
| Item Name | Clutch Shoe Tool |
| Descriptions | It fits KTM 50 SX series. |
| Model | 14-K518 |
| Item Name | Clutch Puller M24 x 1.5 |
| Descriptions | Fits MZ TS250/1, ETZ 250/251/301, SAXON, KANUNI and all 5 speed models. |
| Model | 14-K526 |
| Item Name | Clutch Bleeding Tool |
| Descriptions | Ideal tool to truly add or remove fluid from the hydraulic clutch. |