PRODUCTS / AMERICAN / EUROPEAN BRAND SPECIALIZED TOOLS / KTM（48）
| Model | 14-K365 |
| Item Name | Compression Bolt Removal Tool |
| Descriptions | It makes operator to properly torque the compression valve assembly during installation.<br> 17mm hex head.<br> Made from billet 6061 T-6 aluminum.<br> |
Inquire Now
| Model | 14-K365A |
| Item Name | Compression Bolt Removal Tool |
| Descriptions | It can fit for WP 4CS front forks and it is also one available for KTM WP front forks and one for KYB and 2010 CRF250R, 2013-2014 KX250F front forks. |
| Model | 14-K366A |
| Item Name | 6mm And 8mm Jet Wrench |
| Descriptions | 2 sizes in one, 6mm on one end and 8mm on the other end, it fits round jets.<br> Another one with a rubber cap fits 6mm hex jets.<br> |
| Model | 14-K366B |
| Item Name | FCR Carburetors Tool |
| Descriptions | It provides 4 tools : 6mm hex for main jets, a 3mm Allen for removing the float bowl and long-reach straight slot for pilot jets.<br> The longer one is an essential tool for reaching into recessed cavities to adjust Keihin FCR carburetors.<br> |
| Model | 14-K370 |
| Item Name | Flywheel Puller＜For KTM＞ |
| Descriptions | It provides 4mm(M4 x 0.7 x 30L, 35L), 5mm(M5 x 0.8 x 40L), and 6mm (M6 x 1.0 x 40L) screws each size have two pieces. |
| Model | 14-K371 |
| Item Name | Flywheel Puller M33 x 1.5 R.H. |
| Descriptions | M33 x 1.5 R.H. Internal Thread |
| Model | 14-K372 |
| Item Name | Flywheel Puller M50 x 1.5 R.H. |
| Descriptions | M50 x 1.5 RH Internal Thread.<br> Includes crankshaft protector M16 x P1.5. <br> |
| Model | 14-K379 |
| Item Name | Flywheel Puller M26 x 1.0＜For KTM 4-Stroke＞ |
| Descriptions | M26 x 1.0 right hand internal threads.<br> Puller includes 12mm shaft protector cap.<br> |
| Model | 14-K393 |
| Item Name | Flywheel Puller M27 x 1.0 Lh Ext |
| Descriptions | M27 x 1.0 Lh Ext.<br> Fits most late-model MX bikes.<br> |
| Model | 14-K402 |
| Item Name | Fork Cap Wrench＜For KTM 48mm WP＞ |
| Descriptions | This 4 pins spanner wrench is ideal tool to loosen the KTM 48mm WP fork caps without removing the handlebars. |
| Model | 14-K477 |
| Item Name | WP PDS Shock Needle Removal Tool |
| Descriptions | Pin circle and pin dia : 15.0mm x 2.4mm. |
| Model | 14-K486 |
| Item Name | Seal Retainer And Fork Cap Tool |
| Descriptions | 22mm hex and 3/8＂square drive. |
| Model | 14-K504 |
| Item Name | Engine Lock-Up Tool＜M14 x P1.25＞ |
| Descriptions | It allows you to make the installation and removal of flywheels and flywheel weights faster and easier.<br> It also prevents the engine rotating when working on clutches and countershaft bolts.<br> It can into spark plug hole and stop the piston to prevent the engine from turning over.<br> A soft plastic tip design keeps the piston safe from damage.<br> Works on all two-stroke engines with a 14mm thread sparkplug.<br> |
| Model | 14-K505 |
| Item Name | Power Valve Adjustment Tool |
| Descriptions | An essential tool for adjusting power valve properly. It is used on KTM motorcycle models listed below : 200 SX 2004, 250 SX 2004-2010, 250 XC 2006-2010, 250 XCW 2006-2010, 250 EXC 2004-2005, 300 XC 2006-2010, 300 XCW 2006-2010, 300 EXC 2004-2005. |
| Model | 14-K506 |
| Item Name | Crankshaft Mounting Tool |
| Descriptions | This special tool fits KTM 1994 250/300 SX / MXC / EXC / EGS. |
| Model | 14-K507 |
| Item Name | Clutch Shoe Tool |
| Descriptions | It fits KTM 50 SX series. |
| Model | 14-K514 |
| Item Name | Flywheel Holder Tool＜For KTM＞ |
| Descriptions | It fits KTM 50 series 02-08. |
| Model | 14-K515 |
| Item Name | Unlocking Tool |
| Descriptions | It fits KTM RC8 series. |
| Model | 14-K516 |
| Item Name | Press Out Tool CPL. |
| Descriptions | It fits KTM ATV 450 / 525 series. |
| Model | 14-K517 |
| Item Name | A-Arm Needle Bearing Press Tool |
| Descriptions | It fits KTM ATV 450 / 525 series. |