PRODUCTS / AMERICAN / EUROPEAN BRAND SPECIALIZED TOOLS / DUCATI / DUCATI（124）
| Model | 14-K1006 |
| Item Name | Rocker Arm Depressor Tool |
| Descriptions | Ideal tool to depress the closing rocker for taking the loaded/ unloaded clearance measurements on all 2V and 4V Ducatis. Special ergonomically design with blunt end, to fit easily into the palm and prevent damage for the valve seal.<br> <br> Not needed for Testestretta Motors (998, 999, 749, 1098, 848, 998, 999, 749, 1098, 1198, Multistrada 1200, Diavel, Hyperstrada ). |
Inquire Now
| Model | 14-K1007 |
| Item Name | 6mm Closer Shim Assembly Tool |
| Descriptions | Ideal tool for shim assembly for Ducati models.<br> <br> It facilitates the proper assembly of the closer shim on its taper using the specified torque of 8 Nm (5.9ft/lb).<br> <br> Special window machined design to allow its use without the need to remove the opening rocker arm. |
| Model | 14-K1008 |
| Item Name | Spindle Puller/Slap Hammer＜For Ducati＞ |
| Descriptions | Ideal tool to pull rocker spindles out of all Ducati motors.<br> <br> 5mm end male thread. Rocker spindles pull out easily with a few taps of the slap hammer.<br> <br> Fits all 2-Valve 8mm and 4V Desmoquattro motors.<br> |
| Model | 14-K1009 |
| Item Name | Seal Ring Driving Tool＜For Ducati＞ |
| Descriptions | Ideal tool for seal ring driving.<br> Fits Ducati Panigale models.<br> |
| Model | 14-K1011 |
| Item Name | Crankshaft Hold Tool＜For Ducati＞ |
| Descriptions | Ideal tool to hold crankshaft in TDC position. |
| Model | 14-K384 |
| Item Name | Timing And Crankshaft Turning Tool＜For Ducati＞ |
| Descriptions | It makes ignition-timing work to be performed.<br> Works on most (1990 – present) 750cc, 900cc and 916cc street bike models.<br> |
| Model | 14-K384A |
| Item Name | Crankshaft Turning Tool With Degree Wheel＜For Ducati＞ |
| Descriptions | Used to safely turn the crankshaft of engines, an absolute must when setting valve clerarances.<br> It mark on the degree wheel for perfect valve adjustments.<br> Fits Ducati Monster, Multistrada, 600, 620, 748, 750, 800, 848, 841, 888, 900, 916, 996, 998, 999, 1000, 1098, 1198 engine and also built from 1990 to present 750, 900 & 916.<br> |
| Model | 14-K408 |
| Item Name | Front and Rear Wheel Nut Tool Set |
| Descriptions | The combined socket is two sizes in one, a 55mm 12pt for the rear and a 28mm 6pt for the front. |
| Model | 14-K414 |
| Item Name | Fork Cap Tool |
| Descriptions | Fits most＂OHLINS＂suspension models. |
| Model | 14-K415 |
| Item Name | Steering Stem Nut Tool |
| Descriptions | It fits Ducati all 4V Superbikes, Multistrada, Hypermotard and other models with the large diameter steering stem nut.<br> The rubber cushion design allows you without damaging the steering stem nut in the process of removal and installation.<br> Material：6061-T6 aluminum.<br> |
| Model | 14-K416 |
| Item Name | 14mm/15mm Cylinder Head Nut Torque Tool |
| Descriptions | There is a square hole on these tools for a 1/2 inch drive.<br> 15mm torque tool fits on all modern 2V and 4V Ducati's (Monster, Multistrada, 748, 749, 750, 851, 888, 900, 916, 996, 998, 999, 1000).<br> 14mm torque tool fits on the newer 4V Ducati's (600, 620, 848, 1098, 1198 and Similar).<br> |
| Model | 14-K418 |
| Item Name | Foot Break/Shifter Bolt Removal Tool |
| Descriptions | It fits Ducati Desmosedici RR models. |
| Model | 14-K419 |
| Item Name | Drive Gear Removal Tool |
| Descriptions | It fits Ducati Roundcase 750 sport, 750 GT, '74SS and others with KM3 Nuts. |
| Model | 14-K420 |
| Item Name | Engine Rotating Tool |
| Descriptions | It works on Ducati Monster/748/996/999/SS. |
| Model | 14-K421 |
| Item Name | Alternator Cover Puller |
| Descriptions | Puller provides one tool body (made from 6061 aluminum) and comes with 3 bolts (M10x1.25x50L 1 pc、M6x1.0x30L 2pcs). |
| Model | 14-K422 |
| Item Name | Clutch Hub And Drum Tool |
| Descriptions | Fits all modern 6 speed Ducati's equipped with a dry clutch.<br> Material: Polyamides (PA) with fiber.<br> |
| Model | 14-K422A |
| Item Name | Clutch Hub And Drum Tool＜Steel＞ |
| Descriptions | Fits all modern 6 speed Ducati's equipped with a dry clutch.<br> Material: Carbon Steel.<br> |
| Model | 14-K425 |
| Item Name | V-Twin Bevel Drive Exhaust Nut Wrench |
| Descriptions | It fits Ducati bevel drive twins and single exhaust nuts. |
| Model | 14-K426 |
| Item Name | Cam Pulley Nut Tool |
| Descriptions | It fits Ducati Pantah and other 2 valve belt drives, as well as 4 valve 916 belt drives.<br> Tool provides one holding tool and one socket tool with 1/2” drive.<br> |
| Model | 14-K429 |
| Item Name | Sprocket Nut Socket & Nut |
| Descriptions | You will need this tool to tighten the sprocket ring nut on a Ducati Bevel Drive Twin. This tool is a set, with a new nut. |