PRODUCTS / AMERICAN / EUROPEAN BRAND SPECIALIZED TOOLS / DUCATI(124)

 
Model 14-K1006
Item Name Rocker Arm Depressor Tool
Descriptions Ideal tool to depress the closing rocker for taking the loaded/ unloaded clearance measurements on all 2V and 4V Ducatis. Special ergonomically design with blunt end, to fit easily into the palm and prevent damage for the valve seal.<br> <br> Not needed for Testestretta Motors (998, 999, 749, 1098, 848, 998, 999, 749, 1098, 1198, Multistrada 1200, Diavel, Hyperstrada ).
 
Model 14-K1007
Item Name 6mm Closer Shim Assembly Tool
Descriptions Ideal tool for shim assembly for Ducati models.<br> <br> It facilitates the proper assembly of the closer shim on its taper using the specified torque of 8 Nm (5.9ft/lb).<br> <br> Special window machined design to allow its use without the need to remove the opening rocker arm.
 
Model 14-K1008
Item Name Spindle Puller/Slap Hammer<For Ducati>
Descriptions Ideal tool to pull rocker spindles out of all Ducati motors.<br> <br> 5mm end male thread. Rocker spindles pull out easily with a few taps of the slap hammer.<br> <br> Fits all 2-Valve 8mm and 4V Desmoquattro motors.<br>
 
Model 14-K1009
Item Name Seal Ring Driving Tool<For Ducati>
Descriptions Ideal tool for seal ring driving.<br> Fits Ducati Panigale models.<br>
 
Model 14-K1011
Item Name Crankshaft Hold Tool<For Ducati>
Descriptions Ideal tool to hold crankshaft in TDC position.
 
Model 14-K384
Item Name Timing And Crankshaft Turning Tool<For Ducati>
Descriptions It makes ignition-timing work to be performed.<br> Works on most (1990 – present) 750cc, 900cc and 916cc street bike models.<br>
 
Model 14-K384A
Item Name Crankshaft Turning Tool With Degree Wheel<For Ducati>
Descriptions Used to safely turn the crankshaft of engines, an absolute must when setting valve clerarances.<br> It mark on the degree wheel for perfect valve adjustments.<br> Fits Ducati Monster, Multistrada, 600, 620, 748, 750, 800, 848, 841, 888, 900, 916, 996, 998, 999, 1000, 1098, 1198 engine and also built from 1990 to present 750, 900 & 916.<br>
 
Model 14-K408
Item Name Front and Rear Wheel Nut Tool Set
Descriptions The combined socket is two sizes in one, a 55mm 12pt for the rear and a 28mm 6pt for the front.
 
Model 14-K414
Item Name Fork Cap Tool
Descriptions Fits most"OHLINS"suspension models.
 
Model 14-K415
Item Name Steering Stem Nut Tool
Descriptions It fits Ducati all 4V Superbikes, Multistrada, Hypermotard and other models with the large diameter steering stem nut.<br> The rubber cushion design allows you without damaging the steering stem nut in the process of removal and installation.<br> Material:6061-T6 aluminum.<br>
 
Model 14-K416
Item Name 14mm/15mm Cylinder Head Nut Torque Tool
Descriptions There is a square hole on these tools for a 1/2 inch drive.<br> 15mm torque tool fits on all modern 2V and 4V Ducati's (Monster, Multistrada, 748, 749, 750, 851, 888, 900, 916, 996, 998, 999, 1000).<br> 14mm torque tool fits on the newer 4V Ducati's (600, 620, 848, 1098, 1198 and Similar).<br>
 
Model 14-K418
Item Name Foot Break/Shifter Bolt Removal Tool
Descriptions It fits Ducati Desmosedici RR models.
 
Model 14-K419
Item Name Drive Gear Removal Tool
Descriptions It fits Ducati Roundcase 750 sport, 750 GT, '74SS and others with KM3 Nuts.
 
Model 14-K420
Item Name Engine Rotating Tool
Descriptions It works on Ducati Monster/748/996/999/SS.
 
Model 14-K421
Item Name Alternator Cover Puller
Descriptions Puller provides one tool body (made from 6061 aluminum) and comes with 3 bolts (M10x1.25x50L 1 pc、M6x1.0x30L 2pcs).
 
Model 14-K422
Item Name Clutch Hub And Drum Tool
Descriptions Fits all modern 6 speed Ducati's equipped with a dry clutch.<br> Material: Polyamides (PA) with fiber.<br>
 
Model 14-K422A
Item Name Clutch Hub And Drum Tool<Steel>
Descriptions Fits all modern 6 speed Ducati's equipped with a dry clutch.<br> Material: Carbon Steel.<br>
 
Model 14-K425
Item Name V-Twin Bevel Drive Exhaust Nut Wrench
Descriptions It fits Ducati bevel drive twins and single exhaust nuts.
 
Model 14-K426
Item Name Cam Pulley Nut Tool
Descriptions It fits Ducati Pantah and other 2 valve belt drives, as well as 4 valve 916 belt drives.<br> Tool provides one holding tool and one socket tool with 1/2” drive.<br>
 
Model 14-K429
Item Name Sprocket Nut Socket & Nut
Descriptions You will need this tool to tighten the sprocket ring nut on a Ducati Bevel Drive Twin. This tool is a set, with a new nut.