PRODUCTS / TRANSMISSION SERVICE TOOLS / Nut Tools（45）
| Model | 14-K1037 |
| Item Name | 2-in-1 Swingarm Pivot and Engine Mount Nut Wrench |
| Descriptions | Ideal tool to undo and tighten the pivot nut on the swingarm and the engine mount nut of Kawasaki bikes. |
Inquire Now
| Model | 14-K1038 |
| Item Name | Swingarm Pivot Nut Wrench |
| Descriptions | Ideal tool to undo and tighten the pivot nut on the swingarm of Kawasaki bikes. |
| Model | 14-K1039 |
| Item Name | Engine Mount Nut Wrench |
| Descriptions | Ideal tool to undo and tighten the engine mount nut of Kawasaki bikes. |
| Model | 14-K1040A |
| Item Name | Swingarm Pivot Lock Nut Tool, Wrench Type |
| Descriptions | Ideal tool to remove and install swingarm adjuster lock-nut.<br> Corresponding HONDA OEM 07YMA-MCF0100 |
| Model | 14-K1040B |
| Item Name | Swingarm Pivot Lock Nut Tool, Socket Type |
| Descriptions | Ideal tool to remove and install swingarm adjuster lock-nut.<br> Corresponding HONDA OEM 07YMA-MCF0100 |
| Model | 14-K1041A |
| Item Name | Swinging Arm tool, Wrench Type |
| Descriptions | Ideal tool to remove and install swingarm adjuster lock-nut. <br> Corresponding HONDA OEM 07GMA-KT70200<br> |
| Model | 14-K1041B |
| Item Name | Swinging Arm tool, Socket Type |
| Descriptions | Ideal tool to remove and install swingarm adjuster lock-nut.<br> Corresponding HONDA OEM 07GMA-KT70200<br> |
| Model | 14-K385 |
| Item Name | Swingarm Pivot Nut Tool |
| Descriptions | For removing & replacing lock nut on swingarm pivot shafts.<br> 1/2＂drive and inside diameter is 30mm.<br> |
| Model | 14-K521 |
| Item Name | Swingarm Nut Socket Tool |
| Descriptions | 1/2＂square drive hole for standard ratchet or torque wrench. |
| Model | 14-K521A |
| Item Name | Swingarm Nut Socket Tool |
| Descriptions | Ideal tool to undo and tighten the locking nut on the swing arm of Kawasaki Z900RS<br> 1/2” square drive hole for standard ratchet or torque wrench.<br> |
| Model | 14-K559A |
| Item Name | Engine/Swingarm Lock Nut Tool＜For Aprilia＞ |
| Descriptions | It can be used with a 1/2＂square drive extension bar, ratchet or torque wrench. |
| Model | 14-K561 |
| Item Name | Swingarm Pivot Lock Nut Tool |
| Descriptions | Tool comes with a 1/2＂square drive. |
| Model | 14-K564 |
| Item Name | Ignition Switch Nut Tool |
| Descriptions | Fits most Honda CB 350/450/500/550/750/900/1000, CT70, Z50 motorcycles but should fit all 60s/70s trail and street bikes with the 4 groove ignition nut. |
| Model | 14-K574 |
| Item Name | Steering Stem Nut Tool |
| Descriptions | Fits 1980-2012 Honda CB, CBX, CBR, GL, VFR, VT, Gold Wing, Shadow and Magna series. |
| Model | 14-K575 |
| Item Name | Swingarm Nut Socket Wrench |
| Descriptions | Ideal tool to undo and tighten the 38mm diameter swingarm nut with four 7mm grooves.<br> A 1/2 |
| Model | 14-K631 |
| Item Name | Swing Arm Nut Service Tool Set |
| Descriptions | Set provides six essential tools for servicing swing arm. |
| Model | 14-K670 |
| Item Name | Swing Arm Nut Socket Tool |
| Descriptions | It comes with a 1/2” drive square hole that fits a standard ratchet or torque wrench. |
| Model | 14-K729 |
| Item Name | Spanner Nut Socket |
| Descriptions | Used for removal and installation of spanner (castle) lock nuts.<br> 26mm OD x 20.5mm ID x 6mm Pin Width (4 pins).<br> |
| Model | 14-K731 |
| Item Name | Spanner Nut Socket＜For Yamaha＞ |
| Descriptions | Size: 42mm OD x 36.8mm ID x 6.25mm Pin Width/6 pins.<br> 1/2 inch drive.<br> Applications: Yamaha Models.<br> |
| Model | 14-K732 |
| Item Name | Spanner Nut Socket |
| Descriptions | Large end size: 39mm OD x 30.5mm ID x 7mm Pin Width/4 pins.<br> Small end size: 26mm OD x 19.9mm ID x 6.5mm Pin Width/4 pins.<br> 1/2 inch drive.<br> Applications: Kawasaki models.<br> |